There are two ways for you to login: normal and the 88110 server .
If your DVR devices are via ADSL Internet or Device’IP is dynamic,you can use our 88110 serve for free.
Within LAN,static ip,and using the third domain service.you can login in by normal.
1.1 Normal Login
Start software click the Login Type > Normal .Switch login type.
choose 88110.net
Choose 88110 server login: username and password of 88110 server are the same as which registered in the www.88110.net.
Click,Enter the interface of device management. Click the right upper corner "+" to add a device.
Click done,return to device list interface. The newly add-up device will be shown in the list.
.
Click upper left "Edit", click the device name, enter the device information edit interface; Click "Delete" to delete the device.
Click upper left "Done" to return to device management interface.
After adding the device, live view of channels can be operated.
click,Enter the live view interface(the default interface after login the firmware is the live view interface).
After entering the live view interface, select upper right "Device", click and choose the device, live view the images.
Click the liveview button to view all CHs of the device
Live view window buttons are defined as below:
Button | Definition |
![]() |
PTZ control button |
![]() |
Record of all the channels |
![]() |
Capture images of all the channels |
![]() |
Stop live view of all the channels |
![]() |
Audio of all the channels |
Enlarge the live view :
1、1. Double click the CH to full screen this CH. Double click again to go back to the 4 CH live view.
2、wipe 2 figures to full screen the CH or go back to 4CH live view.
. A right or left swipe jumps from one CH to the next CH like opening book pages.
choose the focus chanel,clickto enable the PTZ. Click the direction button to control the camera.
Swipe to zoom in or zoom out.
choose the focus chanel,,clickto enable the local record function. This button will be in red when recording.Click this button again to stop recording
recorde will be auto-save.
click,and then click
entering the playback interface
Playback instruction:
configuration | Explain |
RemotePlayback |
Playback the recordings in the DVR remotely |
Event Playback | Playback the alarms |
Local Playback |
Playback the recordings in the mobile phone |
Picture Playback |
View and playback the snapshot picture |
Double click the files in the list to start local playback.
Delete Video Files:
Drag the icon > to left to delete the files.
click ,entering the playback interface,Click “Select” to select the remote device.
Then the list of recordings will be created. Select the date then the list of recording of that date will be created.
click,entering the playback interface,to playback the image
click ”:,save picture ,click “
”,delete picture。
choose the living view,click,and then click save or cancel button.
click ,entering parameter configuration interface。
Choose the device first, and then enter the settings like bellow.
you can sitch the Screen orientation by rotating iphone or ipad when full-screen.
More settings are lists here:System, About. Click,entering the interface.
You can set the network and PTZ speed and others here in local system
Stream Type:Switch the Main stream and sub-stream
PTZ Speed:PTZ speed,More to the right, a camera rotating the larger amplitude.
Network:Is only allowed to work in WiFi network.
Capture:Whether the shots in the mobile phone album.