Rohn Towers

20G 10' Section
This tower will handle most home TV antenna systems.

Rohn 20G features:
1-1/4" steel tubing side rails (18 AWG wall)
Completely hot-dipped galvanizing - AFTER fabrication!
Built on 12-1/2" equilateral triangle design
Solid steel zig-zag cross members
Uses Rohn 25G accessories
for applications up to 80 feet.

Price: $106.17
ID #: 000000000000020G




25G 10' Section

Rohn 25G features:
1-1/4" steel tubing side rails (16 AWG wall)
Completely hot-dipped galvanizing - AFTER fabrication!
Built on 12-1/2" equilateral triangle design
Solid steel zig-zag cross members

This is communications or heavy duty T.V. tower. Built on a 12-1/2" equilateral
triangular design with continuous steel "Zig-Zag" crossbracing, entirely electrically
welded and constructed with extra heavy-duty 1-1/4" steel tubing side rails.

Every 25G recieves ROHN Hot Dip Galvanized long life finish to protect
all points of construction and welding against corosion.
for applications up to 200 feet.

Price: $124.73
ID #: 000000000000025G




45G 10' Section
Communications Tower

Rohn 45G features:
1-1/4" heavy steel side rails (14 AWG wall)
Sleeve joined and double-bolted for extra strength
Electrically welded joints
Hot-dipped galvanizing AFTER fabrication
for applications up to 300 feet.

Price: $249.19
ID #: 000000000000045G 




55G 10' Section

Rohn 55G features:
Continuous 7/16" steel rod bracing
18-1/2" equilateral triangle pattern rod bracing
Electrically welded joints
Sleeve joined and double-bolted for extra strength
Completely hot-dipped AFTER fabrication

The Rohn 55G tower is an extra heavy duty 18" face triangular design using
1.5" steel side rails and solid steel 7/16" cross bracing.

Middle sections mease 10 feet long. Sections fit together with a double bolt joint for strength.
The tower is designed to use three guy points radially spaced 120 degrees apart
with anchors set out from the tower 80% of the tower height.

All 55G tower sections and optional accessories have a hot dipped galvanized finish to assure
years of trouble-free service. Sections are supplied with galvanized nuts and bolts.
for applications up to 400 feet.

Price: $305.00
ID #: 000000000000055G




25AG top sections
for use with communication antennas. Compatible with Rohn 25G sections. Galvanized.

9' Top Section with 2" OD support tube 8.25" above apex.

Price: $186.41
ID #: 00000000000025AG




25AG2 top section
for use with communication antennas. Compatible with Rohn 25G sections. Galvanized.

9' 9" Top Section with 2.25" OD support tube 18" above apex.

Price: $201.41
ID #: 0000000000025AG2




25AG3 top section
for use with communication antennas. Compatible with Rohn 25G sections. Galvanized.

9' Top Section with 2.25" OD support tube 12" above apex.

Price: $231.90
ID #: 0000000000025AG3




SB45G 5' short base
General purpose communications tower section.
Constructed on an 18" equilateral triangle pattern using 1-1/4" steel tubing.
Cross bracing is formed from a 7/16" solid steel rod electrically welded to the side rails.
Hot dipped galvanized. Compatible with Rohn's 45G tower sections.

Price: $102.96
ID #: 00000000000SB45G




TB3 Thrust Bearing
2" O.D. antenna support pipe.
Thrust Bearing used on 25g and 45g top section and top plate for top mounting.

Price: $147.63
ID #: 0000000000000TB3




TB4 Thrust Bearing
3" O.D. antenna support pipe.

Thrust Bearing used on 25g and 45g top section and top plate for top mounting.

Price: $83.45
ID #: 0000000000000TB4



45AG2 top sections
Section is 2-3/8" O.D. Support tube that extends 18". 36" total length.

Price: $327.53
ID #: 0000000000045AG2




45AG3 top section
Section is 2-1/4" O.D. Support tube that extends 12". 2"OD antenna stub will fit inside support

Price: $281.89
ID #: 0000000000045AG3




AS25G ACCESSORY
The Rohn AS25G is a rotator plate, drilled to fit the Hygain and Yaesu rotator bolt patterns.
The plate is not drilled for nor is it designed for use with a thrust bearing.

Price: $52.83
ID #: 00000000000AS25G




SB25G Concrete short Base Sections
3'4" short base for use in concrete.

Concrete Base Sections for Rohn's SB25G towers are used in self-supporting and
bracketed applications for securing the tower base.
Sections are buried in concrete foundations that vary depending on soil conditions.

Price: $68.45
ID #: 00000000000SB25G




25G TOWER BASE PLATE
This Rohn base plates allows 25G tower to be mounted on an existing concrete pad.
The BPC25G uses a 3/4" x 12" pier pin to align the plate to the slab.

Price: $61.25
ID #: 0000000000BPC25G




25G TOWER BASE PLATE
This Rohn base plates allows 25G tower to be mounted on an existing concrete pad.
The BPH25G is drilled for use with six 1/2" x 12" base j-bolts.

Price: $207.17
ID #: 0000000000BPH25G




GA25GD Guy Assembly
The Rohn GA25GD guy assembly is used to attach guy wires to 25G tower,
distributing forces to the entire tower instead of just one leg.
It is recommended for use at every guy level.

Price: $109.07
ID #: 0000000000GA25GD




25G Adjustable House Bracket
25G Adjustable House Bracket. Spacing adjustable from 0-15".

Price: $103.26
ID #: 0000000000HB25AG




25G Adjustable House Bracket
25G Adjustable House Bracket. Spacing adjustable from 0-24".

Price: $123.00
ID #: 0000000000HB25BG




25G Adjustable House Bracket
25G Adjustable House Bracket. Spacing adjustable from 0-36

Price: $133.67
ID #: 0000000000HB25CG




SB25G5 short base 5' for use in concrete

Concrete Base Sections for Rohn's 25G towers are used in self-supporting and
bracketed applications for securing the tower base.
Sections are buried in concrete foundations that vary depending on soil conditions.
Bases are NOT to be used in guyed applications.

Price: $55.13
ID #: 0000000000SB25G5




SBH25G Hinged three foot section.

These short base sections are set into a hole, with concrete poured around them.
The SBH25G is 3 feet long.

Price: $222.55
ID #: 0000000000SBH25G




EB2525G EAVE BRACKET
Universal fit. Hinged connection allows tower leg clamps to
remain perpendicular to ground while bolt-down supports rotate to lay flat
along pitched roof or eave. EB2525G (priced per pair).

Price: $29.00
ID #: 000000000EB2525G




HAM IV ROTOR
-CDE/HY-GAIN ROTORS-

for medium communications antenna arrays of up to 15 square feet wind load area.
Includes the innovative DCU-1 Pathfinder Control Unit.

A new alloy ring gear with 100,000 PSI Tensile strength and a new indicator potentiometer
have been added for improved reliability! No more terminal strips!

New Cinch connector plus 8-pin plug at control box - no screwdriver required.
New powder coated finish. Maximum mast size of 2 1/16 inches. It operates at 110V.

HAM IV ROTOR SPECIFICATIONS

WIND LOAD CAPACITY 15.0 square feet
TURNING POWER 800 POUNDS
BRAKE POWER 5000 POUNDS
BRAKE CONSTRUCTION ELECTRIC WEDGE
BEARING ASSEMBLY DUAL RACE/96 BALL BEARINGS
MOUNTING HARDWARE CLAMP PLATES/STEEL U- BOLTS
CONTROL CABLE CONDUCTORS 8 CONDUCTOR (not supplied)
SHIPPING WEIGHT 24 POUNDS

Price: $608.06
ID #: 00000000000HAMIV